VistaTech™

• Residential windows and doors*
  *Specifically suited to thermally broken aluminium, uPVC and timber systems
• Façade
• Office buildings
• Health

• Minimum Size*: 600mm x 400mm 
  *Minimum size charge of 1m2
• Maximum Size**: 5000mm x 3100mm
  **Subject to component, spacer and weight limitations

The maximum unit area permissible under AS1288 needs to be considered.

• Annealed tones available: Clear 
• Toughened tones available: Clear, Green, Grey, Light Grey
• Thicknesses available: 4mm, 5mm, 6mm, 8mm
• Spacer width available: 10mm to 20mm
       - Available as Warm Edge Tri Seal Spacer only
       - Spacer types can only be supplied in equal thicknesses per unit
       - Maximum unit width must equal 60mm

• Low E glass types available as toughened only
• Other glass types available upon request
• Shapes available: simple square and rectangular, complex shapes on application
• VistaTech™ can be incorporated with other products from our Energy, Safety and Security ranges for further benefits

• Suitability of glazing compounds, sealants and gaskets need to be approved by Viridian 
• The Viridian Warranty relies on frame design in accordance with AS2047
• Perimeter seals must be concealed inside glazing rebates and not exposed to radiant ultra violet light or extended exposure to natural sunlight
• Do not store units externally or expose to prolonged moisture prior to installation into window frames
• Do not expose VistaTech™ edges to standing water and moisture as this can result in seal failure
• The frames must incorporate impervious weather seals or an efficient self-draining system
• Wind load and safety determine the type and thickness of glass required, refer AS1288 or AS1170.1
• When transporting and/or installing at altitudes of 800m and above, special air pressure equalisation requirements may apply and must be brought to the attention of Viridian

Standard Triple Glazed Makeup

This table is for comparative data purposes only. 

VistaTech™ Ultimate Performance Range

The VistaTech™ Ultimate Performance range includes one panel of a unique Low E coating and two panels of ordinary clear or toned glass, combined with a Warm Edge Spacer.

VistaTech XP™ Xtreme Performance Range

VistaTech XP™ Xtreme Performance range includes two panels of a unique Low E coating and one panel of ordinary clear or toned glass, combined with a Warm Edge Spacer.

The assembly of this product is protected.
Typical measured values of Viridian products are provided.
All performance data is determined using LBL window 7.5 software. NFRC 100 - 2010 conditions have been used.
Glass surfaces are counted from the exterior to the interior of the building.